Razor Rambler 12 Variable Speed Kit -Throttle and Controller,Electrical Kit KEY

Description

ATTENTION----
THIS LISTING IS NOT FOR THE RAZOR RAMBLER 12 SCOOTER!
Below is the item number for a speed reducer you can ad "to my kit" to control/limit the top speed if needed for beginners..The reducer will not work with the stock style on off controllers.
This ad is for the controller and throttle kit for the Rambler 12 to make it variable speed instead of full throttle/off..
THIS LISTING IS NOT FOR THE RAZOR RAMBLER 12 SCOOTER!
PLEASE NOTE---ATTENTION
IT WILL COME #5 THROTTLE AS PICTURED ABOVE
UNLESS YOU MESSAGE WANTING A DIFFERENT #..
Bought your new rambler 12 and found out it has a dangerous full throttle / off style throttle with no variable speed?
It was a problem we have solved with this kit. This is a aftermarket controller and won't lign up to both mounting screws but it fits nicely and comes with zip ties to hold the other side.
This is for 24volt only and can not be ran in 36volts or you will fry it, we sell 36v kits but this isn't it!
This is a 500 watt controller for more
torque and variable speed.
This controller kit will come with the #5 unless you send a note "At Checkout" and click "ad" message after you type it and include a simple # that is in each picture of the throttle you want.. If you send it afterwards threw emails don't be upset if it comes as pictured. YOU MUST INCLUDE THE NOTE WITH THE ORDER AT CHECKOUT.
Our kit has outputs for taillights and brake lights. If you buy our headlight kit it comes with a pigtail to reconnect your taillights and you connect the headlight to the taillight output , which is in the directions when you get our headlight kit.
Here are some other items that work with this kit that are plug n play
Headlight kit-
eBay item number:
143932816959
Brake or taillight kit-
eBay item number: 142214037328
Reduce top speed with our hidden speed reducer setup-
eBay item number: 222627137275
WARNING--NEVER CONNECT YOUR OLD THROTTLE OR CONTROLLER TO OURS FOR ANY REASON WHAT SO EVER..IT WILL FRY THE CONTROLLER OR THROTTLE!
YOUR BUYING BOTH SO REPLACE BOTH
Want a dependable setup that's much easier to control and safer for your kids (variable speed throttle) that also monitors the batteries level so you always know if you have enough juice to make it home?
Plugs right in like factory,without the factory issues..
This kit is for 24 volt systems only but we do offer a 36 overvolt kit also
Fast Scooters is the leader in performance speed controllers..This Variable Speed setup is rated much higher than stock controllers and don't have the restrictions inside like stock ones and will handle any size 24v brushed motor you would want to upgrade to! It will outlast a stock one.
The upgraded throttle (comes standard if no note is included) also includes a really nice 5 LED battery level indicator so you know your EXACT battery level!! it reads as follows--Dead,25%,50%,75%,100%.. Digital versions above show exact voltage from battery like a multimeter would do.
Kit includes:
1- Fast Scooters Performance controller-Snug Fit-You can bend mounting tabs to help fit
1- Trimax 5 LED throttle with key-Very comfortable for long rides
1- Matching Grip
Everything is clearly marked to make it easy and it only fits one way,This is a very simple install..We ship the same day on orders taken in before 2p.m..We also ship priority so you will have your item fast.
You
no longer will have wires going to factory on off switch and its no longer used, you use the key.
How does a controller kit make a scooter faster?
Answer- Most controllers are under-rated and under-volted.
The factory controller was rated at 250 watts,24 volts..If you check the stock controller it actually puts out 22.3 volts to the motor (remember the motor will run off 12 volts but just not at full power and will run up to 36volts-overvolted)..Our controller set-up puts out 25.6 volts to the motor at full throttle which is what most efficient hi quality controllers should do..The batteries at full charge put out 13.3-13.6 volts..
--This will be the last controller you have to replace--
We are here to help a