Ebike Down Tube Battery Case 18650 Polly Battery Case Ebike+KT Inner Controller

Description

----------------------------
__
♔♔♔♔♔
Specification
__
---------------------
Specification:
1--Voltage: 36V or 48V
2--Charge Port: 2.1DC
3--Dimension: 368x96x9
0mm
4--Recommend configration:10S5P,13S4P, max 52pcs 18650 cells.
5--Carrier for bike included
6--With Power Switch and LED capacity indicator.
9--If you need inner controller and holder, you can choose it.
Info of the controller:
1--Rate Voltage: 36V/48V KT sine wave controller 9mosfets
2--Maximum Current:22±1A
3--With Julet waterproof connector:
9holes for motor,cable length is 24cm(28cm included connector)
3holes for PAS,cable length is 18cm(22cm included connector)
8holes extend cable for 1-4/1-2,cable length is 18cm(22cm included connector)
4--48V controller can work with 13S-54.6V and 14S 58.8V Polly battery.
If you need a BMS to fit this case, you can
click here
54.6V2A with 2.1 DC plug Charger, please
click here
Nickel for this battery case,please
click here
Packing List:
Kit A:
Casex1
Kit B:
Case+Controller+LCD4 display+Throttle+KT-D12L PAS+Brake+1-4 cable+9pins cable(1meter)
Kit C:
Case+Controller+LCD4 display+Throttle+KT-D12L PAS+1-2 cable+9pins cable(1meter)
Kit D
:Controller+LCD4 display+Throttle+KT-D12L PAS+1-2 cable+9pins cable(1meter)
Kit E:
Case+Controller+LCD4 display+Throttle+KT-D12L PAS+Brake+1-4 cable+9pins cable(1meter)
Controller Kit B and E is with a pair of brake, Controller Kit C and D is without brake.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------
Photos: