4" x 4" Go-Kart Live Axle Hub with 1" to 3/4" Step-Down for Gokart, Quad, ATV

Description

Key Features
SPECS - This is a 4" x 4" go-kart live axle hub with a 2-3/4" hub length, 1" axle diameter with a 3/4" step-down, and uses a 1/4" keyway slot. Includes a set of four lug nuts.
SINGLE - Hubs sold individually.
USE - Commonly used on gokarts, quads, ATVs, and trikes that use an 8" wheel.
MATERIAL - Made of tough durable steel.
Product Description
Has your old hub failed, or do you need a new hub to complete an old DIY project you have sitting around?
One of our replacement steel hubs is what you can rely on to get you back up and rolling again.
The 4" x 4" go-kart axle hub is most commonly found on go-karts using 8 inch rear or front wheels. Although these hubs are incompatible with Yerf-Dog 'karts, these are compatible with many quad, ATV, cart, golf, and trike wheels that use this same hub. The hub assembly features a kit of four lug nuts, and the hubs are 2-3/4" long. The inner bore is milled for a 1/4" axle key.
The most common style for gokarts features a 1" inner (or inboard) shaft diameter with the axle turned down to a 3/4" outer diameter.
Please note that our AlveyTech 4" x 4" Go-Kart Live Axle Hubs with 1" to 3/4" Step-Down are sold as singles. To complete your project, you may need to buy more than one.
Specs are going to be important when selecting a new hub. Please refer to our following specs to see if this will be the right hub for your project.
Specifications
Diameter: 5" (125 mm)
Length: 2-3/4"
Keyway & key size: 1/4" (6.5 mm)
Inboard axle bore diameter: 1"
Outboard axle bore diameter: 3/4"
Mounting lugs (across): 4"
Mounting lugs (side by side): 2-7/8"
Lug length: 1-1/16"
Lug thread: 1/2x20