24v 36 v 48v Electric Scooter E-Bike Digital Display Thumb Throttle Handlebar 60

Description

This variable speed universal 48 volt works with any 12v - 99v+ throttle setup has 60 inches of wire attached with a 6 pin connector attached with 5 wires in it and will attach to any of our custom kits.
comes with opposite end and brass to connect to whatever your working on.
Upgrade your throttle on your electric scooter or e bike with this digital display throttle with built in key which is a much better way to monitor your battery with exact numbers and a key to keep it safe..
This throttle comes with a on off button but if you want the one with a key you must include and attach a note at checkout and "ad" it after you type it stating the number in the picture and say you want the keyed version or it comes with on off button.
Installation instructions.
Three wires (red=5V from controller, black=ground, white=5v signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and Blue) are a switched 24v and provide the level for the LEDs.Which would hook up to your on/off switch..