13X5.00-6 Lawn Mower Inner Tube 13x5-6 13x500-6 TR87 Bent Valve 5.30-6 4.50-6

Description

LotFancy inner tube is made of isobutylene isoprene rubber, better than natural rubber in air tightness, elastic damping and aging resistance.
13x5.00-6 inner tube is excellent replacement for Razor Dirt Quad (tire size 13 x 5.00-6 or 145/70-6).
Please note
that versions 19+ of the Razor Dirt Quad use a 12x5.00-6 inner tube.
It is can be used on ATVs, go-karts, dune buggies, wagons, lawn mowers, garden tractors, hand trucks by other brands.
Also fits 15x6.00-6 tires.
Please check your tire size before purchase.
Kindly Recommendation
Inner tube comes with bent air valve, it is recommended to make the valve towards the outside when installation, which can be convenient to inflate.
Specification
Material: Isobutylene Isoprene Rubber
Measurement: 13x5.00-6
Feature: Inflatable
Valve: TR87 Angled Valve Stem
Package Including: Inner Tube
Common causes of tire and tube failures:
A
single puncture
or
small hole
is commonly from a thorn, wire, or small nail. These may be repairable. Check tire as well for thorn, etc. and remove it.
Double slits
are commonly the result of a rim pinch. The tube was pinched between the rim and an object in road/trail. Increase air pressure or use wider tires.
Blowout causing a
large shredded hole
. These are usually not repairable. Check tire and rim as well for damage.
A long cut or rip
may also indicate a tire blow out. Typically this is not repairable. Use care when seating tire during installation.
Inspect before installation
Inspect outside of tread for protruding nails, pieces of glass, thorns, or other objects.
Squeeze any cut to look inside for objects such as slivers of glass.
Visually
inspect inside
of tire casing for nails, glass or debris.
Wipe inside
of casing with a rag, and then carefully feel inside with fingers.
Use care if using a tire lever.
The tire lever is very easy to puncture a hole in your inner tube.
Inspect both sides of tire for bead seating and for any sign of the inner tube sticking out. Reinstall if necessary.
How to inspect the hole on the inner tube
Inspect for air leaks by holding tube close to the sensitive skin of lips or by holding tube near your ear to hear air escaping. Move the tube around its circumference.
If these steps do not work,
submerge tube in water and watch for bubbles at the hole.